We earn commission when you buy through affiliate links.
This does not influence our reviews or recommendations.Learn more.
Have you ever encountered the NTLDR missing error that restricts your system from booting?
Its definitely not a pleasant experience.
It happens when important system files required for the booting process become inaccessible or corrupted.
Weve got you covered with effective solutions to get your system back up and running.
So, lets get started to fix the NTLDR missing error and enjoy a seamless computing experience once again!
What Causes The NTLDR to be Missing Error?
You may see the NTLDR is missing an error due to various reasons.
Anything that disrupts the booting process of your machine can be considered a potential cause.
Lets take a closer look at the most common causes of this error.
Corrupted/Damaged System Partition:One possible cause is a corrupted or damaged system partition.
This can happen if your gear experiences improper shutdowns, disk errors, or gets infected by malware.
When the system partition is affected, it triggers the NTLDR missing error.
As a result, the NTLDR is missing an oops message appears.
When critical system files cannot be accessed due to hardware issues, your system displays the issue notification.
Incorrect Boot Order:The boot order determines the sequence in which your rig searches for bootable devices.
The system might attempt to boot from these devices instead of the designated boot drive.
There are several ways to resolve this booting issue on Windows PC.
Many users could fix this issue just by performing a clean restart.
To rule out this possibility, lets check your floppy and optical drives.
Here is the step-by-step process to perform this method.
1.Disconnect any non-bootable floppy disks, CDs/DVDs/BDs, external hard drives, or flash drives from your setup.
2.start your rig and verify if the NTLDR is missing error still persists.
5.Navigate to the Boot or Boot Order section in the BIOS menu.
6.Use the arrow keys to opt for hard drive with Windows installed as the primary boot unit.
7.If needed, rearrange the boot order by moving the selected hard drive to the top of the list.
8.Save the changes and exit the BIOS prefs.
Adjust Drive parameters in BIOS
Your computers BIOS parameters determine how it uses the drives.
Incorrect tweaks can lead to errors like NTLDR is missing.
So, lets get into the BIOS and see to it the drive configurations are correct.
1.kickstart your machine and dive into the BIOS tweaks.
The key to enter BIOS may vary (common keys include F2, Del, or Esc).
Refer to your computers manual or look for on-screen instructions during startup.
2.In the BIOS controls, locate the drive configuration section.
3.Ensure that the tweaks for your hard drive and other drives are correct.
Look for an Auto setting, which is usually a safe option if youre unsure.
4.Save the changes and exit the BIOS tweaks.
your setup will restart.
To resolve this, well need the original Windows XP installation CD.
By restoring these critical system files from the CD, we can potentially fix the NTLDR missing error.
Learn how to do that below.
1.Insert the original Windows XP installation CD into your computers CD/DVD drive.
2.kickstart your system and boot from the Windows XP CD.
3.When prompted, press any key to boot from the CD.
4.In the Windows XP setup screen, press R to enter the Recovery Console.
5.snag the Windows XP installation that you want to repair and enter the Administrator password if prompted.
Repair or Replace The boot.ini File
The boot.ini file contains important configuration data for the boot process.
If its misconfigured or damaged, it can result in the NTLDR missing error.
1.First, boot your rig from the Windows XP installation CD as described in Method 4.
2.Enter the Recovery Console and choose the Windows XP installation.
3.Enter the Administrator password if prompted.
4.In the command prompt, jot down bootcfg /rebuild (without quotes) and press Enter.
6.power cycle your system and look to see if the error is resolved.
This can help address the missing NTLDR issue.
1.Boot your setup from the Windows XP installation CD.
3.Enter the Administrator password if required.
4.In the command prompt, jot down fixboot and press Enter.
Fortunately, we can use the Windows XP installation CD to repair the MBR and potentially fix the issue.
Perform the below method to do so.
3.Enter the Administrator password if necessary.
4.In the command prompt, typefixmbrand press Enter.
This ensures a secure connection and eliminates any cable-related issues.
1.Turn off your machine and unplug it from the power source.
3.Carefully disconnect and then reconnect all the cables, ensuring they are securely attached.
4.exit the computer case, plug it back into the power source, and turn it on.
5.peek if the NTLDR missing error is resolved.
Keep your operating system up to date:see to it you regularly upgrade your Windows operating system.
Ensure that you properly configure the new hardware in your computers BIOS options.
Double-check the boot order and confirm you choose the right drive as the primary boot equipment.
Instead, use the shutdown or restart options provided by your operating system.
This can be done using external storage devices or cloud-based solutions.
Use reliable antivirus software:Install trustworthy antivirus software on your gear and keep it up to date.
Furthermore, we have shared preventive tips to avoid future occurrences of the NTLDR missing error.
Utilizing reliableantivirus softwarealso helps protect your system frommalwareand viruses that can lead to file corruption and trigger error.
