We earn commission when you buy through affiliate links.
This does not influence our reviews or recommendations.Learn more.
Are you looking for a solution to fix the Windows error code 0xc0000225?
0xc0000225 error means Windows cannot find the file system used for booting.
Even faulty hardware, such as a hard disk or RAM, can cause this error.
So, lets jump straight into the article and troubleshoot your Windows PC for the error code 0xc0000225.
What Causes Error Code 0xc0000225?
There are multiple reasons why your Windows PC is giving the error 0xc0000225.
Your hardware might be faulty, the system files are corrupted, or you installed some major update.
Lets discuss a few common scenarios where youll see error 0xc0000225.
When Windows cannot find these files while booting, the PC shows a 0xc0000225 error.
As mentioned above, error 0xc0000225 is sometimes triggered by faulty hardware.
If you suspect this, I recommend you contact your PC or laptop manufacturer instead of checking it yourself.
If faulty hardware is the issue, ask your manufacturers to get new hardware devices for your PC.
It might also be because of the latest Windows update.
These are some of the most common issues that cause error code 0xc0000225.
Now lets see how to fix this error code in your Windows 7/10/11 PC or laptop.
How Do I Fix Error 0xc0000225?
Here are simple methods to fix error 0xc0000225.
Lets see each of these steps in detail.
First, turn your box on and off using the power button.
You might need to do it 2-3 times before seeing thisdiagnosing your PCscreen.
You will see this automatic repair option in your Windows 10 or 11.
On the next screen, selectTroubleshoot.
Once the troubleshooting window opens up, selectAdvanced Options.
Now you gotta open theCommand Promptwindow.
Once the command prompt window opens, you should probably add some commands.
Lets add these commands step-by-step.
Since we are rebuilding our BCD files, the first command isbootrec /rebuild.
jot down the command and press enter.
The second command you’re gonna wanna enter isbootrec /fixboot.
throw in the command and press enter.
After adding the command, press enter.
Now, again pop in the same commandbootrec /fixbootand press enter.
Once the operation is completed successfully, you oughta enter the last command,bootrec /fixmbr.
After the success message, commandexitto exit the command prompt window and come back to the troubleshooting menu.
Here, you better choose Continue Exit and continue to Windows.
look to see if the error 0xc0000225 is fixed or not.
This method probably works for most computers, but if it doesnt, try the next method.
Read more on disk partition software in this complete guide.
In the next step, add the commandlist disk.
After this command, you will see your disk with a corresponding number on the screen.
In my case, it is Disk 0.
So, the next command is to snag the relevant disk.
For me, it is 0, so I will bang out the commandselect disk 0.
A message will be displayed saying, Disk 0 is now the selected disk.
Add the next command, i.e., list partition, and hit enter.
You will see the partitions of your hard drive.
Here, it’s crucial that you choose the partition of your C drive.
Since my C drive is in partition 3, I will punch in the next command asselect partition 3.
Once the relevant partition is selected, add the final commandactive.
Selectcontinueand check whether your Windows error code 0xc0000225 is fixed.
If the error still persists, move to the next method.
System File Check
This time, we will check the system files for damage or corruption.
If there is damage ordata corruption, this scan will hunt them down and repair them.
key in the commandsfc /scannow.
This scan and fix method can take up to 10 minutes.
So, be patient.
Once done, exit the command prompt window.
Come back to this screen and continue to Windows.
test whether the Windows error code 0xc0000225 is fixed.
Now, go ahead and boot your system using this Windows installation media.
Thenadd your product key, and choose I dont have a product key if you dont have one.
Then go for the punch in of Windows you want to install.
On the next window, selectCustom Install.
opt for partitionwhere you want to set up the new Windows.
Note:Do not hit the Format option.
After selecting the partition, clickNext,and the installation will begin.
Read this article to learn how to recover deleted files in Windows 11.
But Id also like to share a few measures to prevent this error from occurring again.
Most of the time, rebuilding the BCD files will solve your problem.
However, if nothing works, try re-installing your Windows.
What to read next?
Read aboutonline virus scannersto protect your data and system from viruses or malware attacks.
